Turn on the TV, and then turn on the PS3™ systems. Use the TV remote control to switch the video input to display the screen of the source PS3™ system. 4. On the source PS3™ system, select (Settings) > (System Settings) > [Data Transfer Utility]. 5. Select [1. Transfer data from this system to the other PS3™ system.]. Try to launch Safe Mode each time you change a cable. If Safe Mode still doesn’t launch, try power cycling your console. Completely turn off the console by holding the power button. Wait for the power light to stop flashing, then remove the power cable and leave the console for 20 minutes. Reconnect and attempt to launch Safe Mode. 5. The PS3's OS is not stored on the HDD, but the internal flash memory of the PS3. So switching a HDD will not do anything to the OS. So nothing is needed to be done, to get the PS3 up and running, after a HDD switch. The HDD only stores, Media files, save games, DLC etc. Related question. Step 23. Lift the memory card reader out of the PS3 enough to access its ribbon cable. Flip up the retaining flap on the memory card reader ribbon cable socket. Be sure you are prying up on the retaining flap, not the socket itself. Pull the ribbon cable out of its socket and remove the memory card reader. 2 comments. In this video I show you how to replace the hard drive of a super slim PS3. NOTE: This tutorial only works this was on the 12gb model of the ps3 super slim a Align the disc drive’s clips with the 2 holes (marked with an upside-down triangle), then firmly push in until you hear a “click”. Attach the circle cover and horizontal stand feet (long) included with your disc drive. Align the cover’s clips with the corresponding holes on the console and push in until you hear a “click”. Attach cover. 6mJx. If you do indeed have the usb-sata cable, plug the hard drive back in, and wipe the drive to remove all partitions, and don't format it afterwards - the PS3 will handle that. Once that's done, plug it back into the PS3 and see if it boots up to a "firmware not found" screen. If so, download the firmware from Sony's Website, copy it to a USB Read First ps3 super slim 12gb upgrade HDHi, in this video i´ll Show you how to upgrade your 12GB Super Slim to any harddrive or SSD you want.You just Simply select the connected PS3 drive from here and click on the “Erase” option from the toolbar on the right. This will open a new pop-up window, letting you format the PS3 hard drive. Simply give it a name, change the format to FAT32, and click on the “Erase” button. You can now just wait for a while as your Mac system would format Chosen Solution. Try putting a towel with a lot of grip in between your hand and the screwdriver, hopefully the towel will increase traction between you and your hand. If your driver keeps slipping on the screw, stop trying to loosen it because you will strip the screw. Find a place that has the proper screwdriver for the job and take it there. I am going to have to try this method. Thanks. you need to backup existing hard disk content to external hard disk, install new hard disk, reinstall CFW then restore backup. This is what i did, and it worked fine. The ps3 has its own backup utility, and it was really straight forward. Your mileage my vary of course.

how to remove ps3 slim hard drive